SCADA FORGE LINESSCADA for the visualization, control and parameterization of a forging cell with robots, which has been developed with SIEMENS WINCC.

The cell consists of the loading and unloading of parts to 2 CNC lathes with a robot. The design and construction of an appropriate charger for the installation and a control cabinet for the management between the robot, the CNC and the safety was carried out.

The control is carried out with SIEMENS and the application has a PC with a SCADA to manage the different models. This cell is intended for sanding hammers and pots and is mounted on a platform to facilitate its transfer. It consists of a robot, 2 sanders, a laser engraver, an artificial vision equipment and […]

This automatic cell is intended for the forging of screws for the wind power sector. It is made up of a parts loader, 2 robots, an induction oven, a press and an evacuation belt. It has a PLC and a SIEMENS TP to control the installation. The cell is designed so that a single operator […]

The cell consists of the loading and unloading of parts to a CNC lathe with a robot. The design and construction of an appropriate charger for the installation and a control cabinet for the management between the robot, the CNC and the safety devices was carried out.

The application consists of carrying out the extraction of specks from a foundry sandbox by a robot, the speck is evacuated by means of a pneumatic sweeper towards the fence for its subsequent collection by the operator, for reuse. The control is carried out with a SIEMENS PLC and the maneuver is integrated in the […]

Using a PC application, it is possible to define the trajectory of the robot points on the mold and the transition speed between filling points, allowing optimal use of the amount of sand as well as its distribution in the mold. The sand is leveled in the mold by means of a pneumatic sweeper.

This automatic cell is intended for the forging of bearings for the automotive sector. It is made up of a parts loader, 2 robots, an induction furnace, an upsetting press and an evacuation belt. A single operator performs the loading and unloading tasks. The input robot takes a piece from the furnace and introduces it […]

Design, manufacture and assembly of a continuous carousel with the aim of extracting the basket from inside the jet and transporting it from the outlet to the inlet with 2 intermediate positions for loading and unloading.